Therm-All is a 6 millimetre thin insulation sheet manufactured of fully recycled material, free from freon and halogen. The sheet is produced of foamed polystyrene, a material that does not age. The cell structure in the sheet is built up of fine, closed cells that give it its excellent physical and mechanical characteristics.

An insulation capacity that saves energy

The special cell structure means that the sheet does not conduct heat. Laying Therm-All on the floor means that heat will instead, be effectively reflected back towards the floor surface. As "waste heat" is taken care of, you utilise energy in an effective manner and thereby lower your energy consumption.

Effective protection against damp and cold

Therm-All not only takes care of the heat, it is also an effective guard against the cold and damp. The material is resistant to cement, plaster and most alkalis, however, not against organic solvents. Therm-All is water repellent – does not rot or go mouldy. In addition the sheets have a sound insulating effect, which makes the floor "quieter" to walk on.

Increase the effect of the floor heating

The insulation sheets are easily laid between the existing floor and the floor heating foil. This gives not only a smooth and protective underlay but also increases the effect of the floor heating.

No insulation material is easier to use

As Therm-All is only 6 millimetres thick, weighs next to nothing (40g/m2) it is very easy to handle. The sheets can be easily cut and adapted to the surface to be covered.

Characteristics of Therm-All®

High insulation capacity
Reflects heat
Blocks out damp and cold
Step sound insulation
Environmentally friendly
Does not age
Does not rot or go mouldy
Resistant to cement, calcium, plaster, alkalis